Catalogue: Remote Release Systems

• Approvals: EC approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.31kg

Complete with 1m tubing and two sleeve hoses.  Knotted weak link is included. For installation please consult your supplier of raft or MES equipment.

• Approvals: EC approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.6kg

Complete with 1 m tubing and two sleeve hoses, weak link not included. For installation please consult your supplier of raft or MES equipment.

• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.6kg

Complete with 1 m tubing and two sleeve hoses, weak link not included. Stainless steel metal thimbles for heavy load installations.

• Approvals: EC approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.735kg

Complete with 1 m tubing and two sleeve hoses, inclusive weak link. One additional H20 is mounted on the tubing in order to secure correct function of the installation in case of a float-free situation. For installation please consult your supplier of raft or MES Equipment.

• Approvals: EC approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.61kg

For installation with stand-alone rafts (not MES). For installation please consult your supplier of rafts.

• Approvals: EC approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.505kg

For installation please consult your supplier of raft or MES Equipment. Only available through Viking network.

• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: approx. 4 m
• Weight: 0.735kg

Complete with 1 m tubing and two sleeve hoses, inclusive weak link. One additional H20 is mounted on the tubing in order to secure correct function of the installation in case of a float-free situation. For installation please consult your supplier of raft or MES Equipment.

• Breaking Strength: White rope sling: , Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.65kg

Supplied with weak link. ERU Cable lenghts 1,8m.  For installation please consult your supplier of raft or MES Equipment.

• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.65kg

For installation with stand alone rafts (not MES).
Suppled with standard weak link system. ERU cable lenghts 1,8m. For installation please consult your supplier of raft or MES equipment.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.6kg

No weak link supplied. ERU Cable lenghts 1,8m.  For installation please consult your supplier of raft or MES equipment.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: approx. 4 m
• Weight: 0.6kg

No weak link supplied, one rope sling, increased release depth 4 metres. ERU Cable lenghts 1,8m. For installation please consult your supplier of raft or MES equipment.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: approx. 4 m
• Weight: 0.6kg

No weak link supplied, one rope sling, increased release depth 4 metres. ERU Cable lenghts 1,8m. Supplied with Cable connectors. For installation please consult your supplier of raft or MES equipment

• Breaking Strength: White rope minimum 15kN
• Release Depth: 1,5 - 4,0 m
• Weight: 0,6kgkg

No weak link supplied, one rope sling, ERU cable lenghts 1,8m. Supplied with cable connectors.  For installation please consult your supplier of raft or MES equipment.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: approx. 4 m
• Weight: 0.25kg

Complete with 1 metre tubing and two sleeve hoses, no weak link supplied. Can be water activated at approx 4 metres, but for float-free installation there shall always be a standard H20 in the lashing system.

• Weight: 0.82kg

Supplied with stainless steel coupling for stainless steel tubing. Installation of the MRRS system should always be done by a trained service stations or shipyard staff and in accordance with instructions or drawings from liferaft manufacturer or Hammar. For detailed installation instructions please ask for Installation and Maintenance document.

• Weight: 0.82kg

Supplied with stainless steel coupling for nylon tubing. Please note that Hammar do not recommend to use nylon tubing on longer installations due to exposure for fire. Installation of the MRRS system should always be done by a trained service stations or shipyard staff and in accordance with instructions or drawings from liferaft manufacturer or Hammar. For detailed installation instructions please ask for Installation and Maintenance document.

• Weight: 0.07kg

Spare part

• Weight: 0.07kg

Spare part

• Weight: 0.09kg

Complete with stainless steel coupling for stainless steel tubing connection

• Weight: 0.09kg

• Weight: 0.012kg

• Weight: 0.025kg

• Weight: 0.003kg

Spare part

• Weight: 0.001kg

Spare part

• Weight: 0.035kg

Supplied by metre. 10/20/25/30/40/50 metres rolls also available.

• Weight: 0.02kg

Used in set-up with one pump and two or more liferafts in the same system.

• Weight: 0.09kg

Used in set-up with two or more pumps connected to one MRU in the same system.

• Weight: 0.02kg

Spare part

• Weight: 0.02kg

Easy to use and provide a clean cut without flakes

• Weight: 0.09kg

• Weight: 0.1kg

Ensures tight connection.

• Weight: 0.01kg

Spare part

• Weight: 0.003kg

Spare part

• Weight: 0.008kg

Spare part

• Weight: 0.025kg

Supplied by metre.

• Weight: 0.05kg

• Weight: 0.07kg

The vacuum pump shall be tested annually and lubricate the piston every second year. Only use original lubricant or similar type with Teflonbase.

• Weight: 0.005kg

The safety seal shall be used on all vacuum pumps in order to avoid unauthorized use.

The protective cap shall be used during installation and service in order to avoid water and dirt to enter the tubing system.

• Weight: 0.03kg

• Weight: 0.035kg

• Weight: 0.035kg

• Weight: 0.035kg

• Weight: 0.035kg

• Release Depth: Approx. 4 metres
• Weight: 0,25kgkg

Complete with 1 metre tubing and two sleeve hoses, no weak link supplied. Can be water activated at approx 4 metres. but for float-free installations there shall always be a standard H20 in the lashing system.

• Weight: 0.002kg

Spare part

• Weight: 0.002kg

Spare part

• Breaking Strength: White rope sling: minimum 15 kN
• Weight: 0.29kg

No weak link supplied. Cable length 1,5 metre

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: approx. 6 m
• Weight: 0.3kg

No weak link supplied.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.3kg

No weak link supplied.

• Breaking Strength: Cord sling: minimum 6 kN
• Release Depth: 1,5 - 4 m
• Weight: 0.5kg

With release cord, pilot line, metal ring, cable tie and installation manual in English.

Note: For LifeBuoy Systems supplied until spring 2010.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: 1,5 - 4,0 metres
• Weight: 0,3kg

Supplied with extra long rope sling to fit the Polar Box.

• Breaking Strength: White rope sling: minimum 15 kN
• Release Depth: approx. 4 m
• Weight: 0.29kg

No weak link supplied.

• Release Depth: 1,5 - 4 metres
• Weight: 0.28kg

No weak link supplied. This ERU can be used to remote release an EPIRB or a Lifebuoy or other lifesaving applicances.

• Release Depth: 1,5 - 4,0 metres
• Weight: 0,29 kgkg

No weaklink supplied. This ERU can be used  to remote release an Epirb or a LifeBuoy or other lifesaving appliances.

• Weight: 0.25kg

Suitable for 2 ERU’s and produced in GRP. IP66 class. Weight 150 gram. Steel grey colour. Size: 80 x 75 x 56mm

• Dimensions: 55 x 55 x 38mm
• Weight: 0,15kg

Suitable for one ERU and produced in GRP. IP66 class. Steel grey colour.

• Dimensions: 4 x 2 x 0,5 mm2
• Weight: 0.19kg

Diameter 12mm

• Dimensions: 4 x 0,75 mm2
• Weight: 0.19kg

Diameter 10mm

• Dimensions: 4 x 0,75 mm2
• Weight: 0.2kg

Diameter 8mm

• Battery Backup: ERRS CP Control Panel Mk I
• Weight: 0.75kg

Replacement back-up battery for ERRS CP Control Panel MK I, Lithium battery with transport class dangerous gods class 9.

• Weight: 0.0027kg

If required this “dummy” can replace the back-up battery in the CP Control Panel Mk I

• Battery Backup: Yes
• Dimensions: 230 x 200 x 110mm
• Weight: 2,9kgkg

External battery for ERRS CP Control Panel Mk I (old version HM-0410) and used with lead acid battery. Installation shall be done close to the CP Control Panel Mk I. Produced in marine resistant alloy. IP66 class.

• Weight: 0,005kg

Indicator light: Green

Diameter mounting hole: 8mm

Power supply: 18-32 VDC (20mA)

Housing material: stainless steel

Protection rating: IP68

• Battery Backup: None
• Dimensions: 102x102x82
• Outputs: 1
• Weight: 0.6kg

For release of one unit (liferaft/EPIRB/Lifebuoy). Powered by 24VDC  emergency power. No back-up battery. Produced in GRP. IP class66. Colour: beige/grey. Size: 102 x 102 x 82mm. If mounted out-side of bridge or wheel-house the release switch shall be in a weather protected enclosure with minimum IP 67.

• Battery Backup: None
• Dimensions: 47x34x23 / 35x40x21
• Outputs: 1
• Weight: 0.15kg

For release of one unit (liferaft/EPIRB/Lifebuoy). Consist of a push button module and an electronic switch module and they are supplied separately. The hole diameter for the push button module is 16mm. The electronic switch module has two fastening holes with diameter 4mm and shall be mounted protected on the inside of the instrument panel.

• Battery Backup: None
• Dimensions: 102x102x82mm
• Outputs: 1
• Weight: 0,6 kgkg

Input to HM-0710, included in the HM-0710 system check. For release of one unit (liferaft/EPIRB/Lifebuoy). Powered by 24VDC  emergency power. No back-up battery. Produced in GRP. IP class66. Colour: beige/grey. Size: 102 x 102 x 82mm. If mounted out-side of bridge or wheel-house the release switch shall be in a weather protected enclosure with minimum IP 67.

• Battery Backup: None
• Dimensions: 102x102x82
• Outputs: 1
• Weight: 0.6kg

Parallel connection with HM-0460, HM-0461, HM-0462. Powered by 24VDC  emergency power. No back-up battery. Produced in GRP. IP class66. Colour: beige/grey. Size: 102 x 102 x 82mm. If mounted out-side of bridge or wheel-house the release switch shall be in a weather protected enclosure with minimum IP 67.

• Battery Backup: None
• Dimensions: 102x102x82
• Outputs: 1
• Weight: 0.6kg

Powered by 24VDC  emergency power. No back-up battery. Produced in GRP. IP class66. Colour: beige/grey. Size: 102 x 102 x 82mm. If mounted out-side of bridge or wheel-house the release switch shall be in a weather protected enclosure with minimum IP 67.

• Weight: 0.035kg

• Weight: 0.003kg

• Battery Backup: Up to 12 hours
• Dimensions: 124x184x100
• Inputs: 1
• Outputs: 2
• Weight: 2.05kg

Automatic release of liferaft/EPIRB at a specified degree of list. Two active outputs and one input for hydrostatic pressure switch – HPS or remote push button. 24V emergency power. Battery back-up with 5 years lifetime. IP66 class. Colour: beige/grey. If mounted out-side of bridge or wheel-house the release switch shall be mounted in a weather protected enclosure with minimum IP67.

• Battery Backup: Up to 24 hours
• Dimensions: 124x184x100
• Inputs: 1
• Outputs: 2
• Weight: 2,0 kgkg

Can release two objects (liferafts/EPIRB), both manually by push button and automatically by an input activation. Two active outputs and one input for hydrostatic pressure switch – HPS or remote push button. 24V emergency power. Battery back-up with 5 years lifetime. IP66 class. Colour: beige/grey. If mounted out-side of bridge or wheel-house the release switch shall be mounted in a weather protected enclosure with minimum IP67.

• Weight: 2.65kg

List angle detection, battery operated, waterproof 10m for enclosure

• Weight: 0.025kg

• Weight: 0,2kgkg

The ERU Emulator can verify that an electric pulse is sufficient to activate an ERU at the connection point. Supplied with battery and connection wires.

• Release Depth: 1,2 m
• Weight: 0.25kg

Activates at 1,2 m water depth as default. Other release depth is available on request. 5 years of lifetime from date of manufacturing.

• Dimensions: 102 x 152 x 82mm
• Weight: 0.8kg

Protective enclosure for HPS switch. IP66 class. Colour: beige/grey

• Dimensions: 102 x 152 x 82mm
• Weight: 0.8kg

IP66 class. Colour: beige/grey

• Dimensions: 102 x 152 x 82mm
• Weight: 0.8kg

IP66 class. Colour: beige/grey

• Dimensions: 100x100x80mm
• Weight: 0.74kg

Activates at the presence of bulk water, not due to moisture or rain. IP66 class. Colour: beige/grey. Measurements: 100x100x80mm

• Dimensions: 188x188x129,5
• Weight: 1.1kg

Protects the water sensor from abuse or splashes of water. IP66 class. Colour: beige/grey. Measurements: 188 x 188 x 129,5mm

• Weight: 0,075kgkg

Spare part

• Approvals: EC approval
• Breaking Strength: White rope sling: 15kN; Weak link: 2,2kN +/- 0,4kN
• Release Depth: 1,5-4 m
• Weight: 1.5kg
• Cable Length1500mm

The Polar Box is designed to offer float-free function of the H20 hydrostatic Release Units down to minus 50 degrees. One H20 will release the lashing and the second H20 will cut the electrical cable to the life raft. The Polar Box shall be installed with HeaterGuard HM-0492 to optimize the heating function in the Polar Box. The installation shall always be done by authorized ship’s electrician. For further information consult CM Hammar. Replacement HR-0360 ( Kit including H20 and H20E)

• Weight: 0.09kg

• Weight: 0.12kg

• Approvals: EC approval
• Breaking Strength: White rope sling: 15kN; Weak link: 2,2kN +/- 0,4kN
• Release Depth: 1,5-4m
• Cable Lenght1900mm

The Polar Box is designed to offer float-free function of the H20 Hydrostatic Release Units down to minus 50 degrees. Includes two H20 ERU, one for cutting lashing and one for cable. Replacment order HM-0487 (Kit including H20 ERU and H20E ERU)

• Approvals: EC approval
• Breaking Strength: White rope sling: 15kN; Weak link: 2,2kN +/- 0,4kN
• Release Depth: 1,5-4m
• Cable Lenght1500mm

The Polar Box is designed to offer float-free function of the H20 Hydrostatic Release Units down to minus 50 degrees. The Polar Box shall be installed with HeaterGuard HM-0492  to optimize the heating function in the Polar Box. The installation shall always be done by authorized ship’s electrician. For further information consult CM Hammar. Replacement order HR-0160

• Battery Backup: No
• Release Depth: 1,5 - 4,0 metres
• Weight: 18kg

Included in the kit:
* One GRP holder with pre-installed metal holder.
* One ERU (electric remote unit) with cord pre-installed on the metal holder. Cable length 1,5m
* One Release Switch in protective box to be mounted at the wheel-house or bridge. Colour: silky grey. IP 66 class. If mounted outside it shall be protected by an outer protective enclosure. Maximum diameter for cable 12mm.
* One connector box in marine grade plastic, IP66 class. Colour: steel grey. Maximum diameter for cable 12mm.
* 20 meters of grey cable 2 x 0,75 mm2, diameter 8mm, other lengths available upon request.
* One manual safety pin in stainless steel
* One pilot line for loading the lifebuoy
* Installation manual, user guide, marking instruction and test of  the Lifebuoy Release System document.

For measurements please ask for drawings.

Not supplied in the kit from Hammar:

• Lifebuoy (any SOLAS lifebuoy will fit the GRP holder)
• Mounting bolts and fittings for installation on-board.

• Release Depth: 1,5 - 4,0 metres
• Weight: 18kg

Included in the kit:
* One GRP holder with pre-installed metal holder.
* One ERU (electric remote unit) with cord pre-installed on the metal holder. Cable length 1,5m
* One Release Switch in protective box to be mounted at the wheel-house or bridge. Colour: silky grey. IP 66 class. If mounted outside it shall be protected by an outer protective enclosure. Maximum diameter for cable: 12mm.
* One manual safety pin in stainless steel
* One pilot line for loading the lifebuoy
* Installation manual, user guide, marking instruction and test of  the LifeBuoy Release System document.

For measurements please ask for drawings.

Not supplied in the kit from Hammar:

• Lifebuoy (any SOLAS lifebuoy will fit the GRP holder)
• Mounting bolts and fittings for installation on-board.
• Cable and connector box

• Battery Backup: No
• Release Depth: 1,5 - 4,0metres
• Weight: 18kgkg

Included in the kit:
* One GRP holder with pre-installed metal holder.
* One ERU (electric remote unit) with cord pre-installed on the metal holder. Cable length 1,5m
* One Release Switch push button and consist of a push button module and an electronic switch module, supplied separately.
* One connector box in marine grade plastic, IP66 class. Colour: steel grey. Maximum diameter for cable 12mm.
* 20 meters of grey cable 2 x 0,75 mm2, diameter 8mm, other lengths available upon request.
* One manual safety pin in stainless steel
* One pilot line for loading the lifebuoy
* Installation manual, user guide, marking instruction and test of  the LifeBuoy System document.

For measurements please ask for drawings.

Not supplied in the kit from Hammar:

• LifeBuoy (any SOLAS lifebuoy will fit the GRP holder)
• Mounting bolts and fittings for installation on-board.

• Weight: 16kg

Included in the kit:
* One GRP holder with pre-installed metal holder.
* One manual safety pin in stainless steel
* One pilot line for loading the lifebuoy
* Installation manual and user guide.

For measurements please ask for drawings.

Not supplied in the kit from Hammar:

• LifeBuoy (any SOLAS lifebuoy will fit the GRP holder)
• Mounting bolts and fittings for installation on-board.

• Weight: 16kgkg

Included in the kit:
* One GRP holder with pre-installed metal holder.
For measurements please ask for drawings.

Not supplied in the kit from Hammar:

• LifeBuoy (any SOLAS lifebuoy will fit the GRP holder)
• Mounting bolts and fittings for installation on-board.

• Weight: 1.8kg

• Weight: 0.4kg

Includes ERU electric/water activation, release cord, manual in English.

• Weight: 18kg

Includes 30 meters of stainless tubing.

• Battery Backup: Recharg. Up to 20 h
• Dimensions: 125x122x83,5
• Inputs: 4 + 2
• Outputs: 10 + 2
• Weight: 2.62kg

Customized solutions for activation of several lifesaving appliances, evacuation systems or loads.

• Dimensions: 125x122x83,5
• Inputs: 4 + 2
• Outputs: 10 + 2
• Weight: 2.62kg

Customized solutions for activation of several lifesaving appliances, evacuation systems or loads.

• Weight: 0.165kg

• Weight: 0.22kg

• Cable Lenght1,55m

Replacement Heating element for Polar Box: HM-0491 and HM-0498

Shall be installed with HeaterGuard HM-0492

• Approvals: IECEX and ATEX approved
• Breaking Strength: 15kN
• Release Depth: Electric Activation Only

Can be installed inside EX-zone, no weak link supplied.

• Approvals: IECEX and ATEX approved
• Breaking Strength: 15kN
• Release Depth: 1,5-4m

Can be installed inside EX-zone, no weak link supplied.

• Approvals: IECEX and ATEX approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN according to SOLAS regulations
• Release Depth: 1,5-4 m

Can be installed inside EX-zone. Longer sling for use in Polar Box.

• Approvals: IECEX and ATEX approved
• Release Depth: 1,5-4 m

Can be installed inside EX-zone, no rope sling or weak link supplied.

• Approvals: EX approved

• Approvals: EX approved

• Approvals: EX approved
• Weight: 1.6kg

Including enlarger M20/M25.

Including enlarger M20/M25.

• Weight: 0.031kg

• Weight: 0.047kg

• Approvals: IECEX and ATEX approved, EC approved
• Breaking Strength: White rope sling: minimum 15 kN, Weak link: 2,2 +/- 0,4 kN
• Release Depth: 1,5-4 m
• Cable Lenght1900mm

The Polar Box is designed to offer float-free function of the H20 Hydrostatic Release Units down to minus 50 degrees. The electrically heated box for two H20 ERUs, for use in EX-classed areas. First ERU releases the liferaft lashing, second ERU cuts the additional electrical cord.

• Approvals: CE approved
• Weight: 0.12kg

To be used for cutting the MRU plastic tubing on Raft/MES installations. No rope or weak link. CE approved. English top label. Supplied with multilingual marking instruction.

• Approvals: EC approved
• Breaking Strength: 15kN
• Release Depth: 1,5 - 4,0m
• Weight: 0.18kg

Replacement unit for Polar Box and has a longer rope sling than standard. CE approved. English top label. Supplied with multilingual markinginstruction.

• Approvals: EC approved
• Weight: 0.32kg

Replacement kit for Polar Box and comes with H20 for liferaft with longer rope sling to fit Polar Box and one H20 without rope for cable cutting. EC approved. Marking instruction is included.

• Weight: 0.022kg

• Weight: 0.05kg